Archives

Visite de l’usine de Finkle Steel de Sorel

  • avril 17, 2023
  • Comments off

L’équipe ETS (Neda Ghodrati, Prashant Dhondapure, et le prof. Mohammad Jahazi) a visité l’usine de Finkle Steel de Sorel, Québec, Canada le 27/02/2023. L’objectif de cette visite était de finaliser le plan de coupe des blocs de 1″ à partir du centre de la masselotte d’un lingot de 63″. Les blocs spécifiés seront analysés à […]

Lire Plus

Influence of Hot Top Height on Macrosegregation and Material Yield in a Large-Size Cast Steel Ingot Using Modeling and Experimental Validation

  • janvier 6, 2023
  • Comments off

« Influence of Hot Top Height on Macrosegregation and Material Yield in a Large-Size Cast Steel Ingot Using Modeling and Experimental Validation. » GHODRATI, Neda, BAITECHE, Mounir, LOUCIF, Abdelhalim, et al. GHODRATI, Neda, BAITECHE, Mounir, LOUCIF, Abdelhalim, et al. Metals, 2022, vol. 12, no 11, p. 1906. Click here to read the Research Article

Lire Plus

« Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking. » KAVEH, Kianoosh, MORIN, Jean-Benoit, JAHAZI, Mohammad, et al. Association for Iron & Steel Technology, 2022.

  • janvier 6, 2023
  • Comments off

« Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking. » KAVEH, Kianoosh, MORIN, Jean-Benoit, JAHAZI, Mohammad, et al. Association for Iron & Steel Technology, 2022. Click here to read the Research Article

Lire Plus

Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel.«  KHAN, Makarim, SHAHRIARI, Davood, JAHAZI, Mohammad, et al. Frontiers in Mechanical Engineering, 2021, vol. 7.

  • janvier 6, 2023
  • Comments off

« Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel. » KHAN, Makarim, SHAHRIARI, Davood, JAHAZI, Mohammad, et al. Frontiers in Mechanical Engineering, 2021, vol. 7. Click here to read the Research Article

Lire Plus

«Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process.» Kavyani, M., Ebrahimi, G. R., Ezatpour, H. R. et Jahazi, M.. 2022. Journal of Magnesium and Alloys, vol. 10, nº 6. p. 1640-1662.

  • janvier 6, 2023
  • Comments off

«Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process.» Kavyani, M., Ebrahimi, G. R., Ezatpour, H. R. et Jahazi, M.. 2022. Journal of Magnesium and Alloys, vol. 10, nº 6. p. 1640-1662.   Click here to read the Research Article

Lire Plus

«Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel.»

  • janvier 6, 2023
  • Comments off

«Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel.» Jagannadh Sripada, Yuan Tian, Kanwal Chadha, Gobinda Saha, Mohammad Jahazi, John Spray, Clodualdo Aranas Jr. Materials Characterization, Volume 192, Pages 112174, Elsevier   Click here to read the Research Article

Lire Plus

Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel

  • août 30, 2022
  • Comments off

Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel. Jagannadh Sripada, Yuan Tian, Kanwal Chadha, Gobinda Saha, Mohammad Jahazi, John Spray, Clodualdo Aranas Jr. Materials Characterization,Volume 192, Pages 112174, Elsevier Click here to read the Research Article

Lire Plus