News

Microstructure-based finite element modeling of a martensitic stainless steel during hot forging

“Microstructure-based finite element modeling of a martensitic stainless steel during hot forging”. Simin Dourandish, Henri Champliaud, Jean-Benoit Morin, Mohammad Jahazi. The International Journal of Advanced Manufacturing Technology, Volume 123, Numéro 7, Pages 2833-2851, 2022. Click here to read the Research Article
Read More

Influence of Hot Top Height on Macrosegregation and Material Yield in a Large-Size Cast Steel Ingot Using Modeling and Experimental Validation

“Influence of Hot Top Height on Macrosegregation and Material Yield in a Large-Size Cast Steel Ingot Using Modeling and Experimental Validation.” GHODRATI, Neda, BAITECHE, Mounir, LOUCIF, Abdelhalim, et al. GHODRATI, Neda, BAITECHE, Mounir, LOUCIF, Abdelhalim, et al. Metals, 2022, vol. 12, no 11, p. 1906. Click here to read the ...
Read More

Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots.

“Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots.” Ali Vedaei-Sabegh, Jean-Benoît Morin, Henri Champliaud, Mohammad Jahazi. Journal of Materials Research and Technology. Volume 21, Pages 3412-3424. 2022 Click here to read the Research Article
Read More

“Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking.” KAVEH, Kianoosh, MORIN, Jean-Benoit, JAHAZI, Mohammad, et al. Association for Iron & Steel Technology, 2022.

“Post-mortem study of magnesia-carbon refractory bricks exposed to thermal radiation in electric arc furnace steelmaking.” KAVEH, Kianoosh, MORIN, Jean-Benoit, JAHAZI, Mohammad, et al. Association for Iron & Steel Technology, 2022. Click here to read the Research Article
Read More

“Slag characterization regarding refractory wear in EAF steelmaking route.” AZZAZ, Riadh, KAVEH, Kianoosh, MORIN, Jean-Benoit, et al. Conference of metallurgists, 2022.

“Slag characterization regarding refractory wear in EAF steelmaking route.” AZZAZ, Riadh, KAVEH, Kianoosh, MORIN, Jean-Benoit, et al. Conference of metallurgists, 2022. Click here to read the Research Article
Read More

Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel.“ KHAN, Makarim, SHAHRIARI, Davood, JAHAZI, Mohammad, et al. Frontiers in Mechanical Engineering, 2021, vol. 7.

“Interactions between dynamic softening and strengthening mechanisms during hot forging of a high-strength steel.” KHAN, Makarim, SHAHRIARI, Davood, JAHAZI, Mohammad, et al. Frontiers in Mechanical Engineering, 2021, vol. 7. Click here to read the Research Article
Read More

«Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process.» Kavyani, M., Ebrahimi, G. R., Ezatpour, H. R. et Jahazi, M.. 2022. Journal of Magnesium and Alloys, vol. 10, nº 6. p. 1640-1662.

«Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process.» Kavyani, M., Ebrahimi, G. R., Ezatpour, H. R. et Jahazi, M.. 2022. Journal of Magnesium and Alloys, vol. 10, nº 6. p. 1640-1662.   Click here to read the Research Article
Read More

«Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel.»

«Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel.» Jagannadh Sripada, Yuan Tian, Kanwal Chadha, Gobinda Saha, Mohammad Jahazi, John Spray, Clodualdo Aranas Jr. Materials Characterization, Volume 192, Pages 112174, Elsevier   Click here to read the Research Article
Read More

«Thermomechanical study of H13 hot forged bars» Ebacher, L., Jahazi, M., Morin, J. B. et Ritchey, B.. 2022

« Thermomechanical study of H13 hot forged bars » Ebacher, L., Jahazi, M., Morin, J. B. et Ritchey, B.. 2022. In 4th International Ingot Casting Rolling Forging, ICRF 2022 – Conference Proceedings (Pittsburgh, PA, USA, June 21-23, 2022) p. 26-37. Association for Iron and Steel Technology, AISTECH. Click here to ...
Read More

Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel

Effect of hot isostatic pressing on microstructural and micromechanical properties of additively manufactured 17–4PH steel. Jagannadh Sripada, Yuan Tian, Kanwal Chadha, Gobinda Saha, Mohammad Jahazi, John Spray, Clodualdo Aranas Jr. Materials Characterization,Volume 192, Pages 112174, Elsevier Click here to read the Research Article
Read More

Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process

Microstructure refinement, mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process. Journal of Magnesium and Alloys, KAVYANI, M., EBRAHIMI, G. R., EZATPOUR, H. R., et al. , 2022, vol. 10, no 6, p. 1640-1662. Click here to read the Research Article
Read More

Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel.

Read More